The role of knife gate valves in wastewater networks What is a knife gate valve? Description A knife gate valve is a valve specifically designed to handle fluids containing solids, similar to wastewater or sewage. It’s generally used in artificial channels and wastewater treatment installations. Introductory function Knife gate valve has a unique knife-shaped valve […]
What is a Butterfly Valve? Introduction Butterfly valve, also known as flap valve, is a simple structure of the regulating valve, which can be used for the on/off control of low-pressure pipeline medium, and the butterfly valve refers to a kind of valve that rotates around the valve shaft to open and close the shut-off
What does CWP mean on a ball valve Introduction A ball valve is a fluid flow control device that uses a hollow, porous, swingable ball to control the flow of fluid through it. When the hole in the center of the ball is aligned with the inlet, it is in the open position, and when
The role of check valves in water lines Introduction Check valves are extensively used in water pipe systems. The main purpose of installing a check valve on the water pump outlet pipe is to help a large quantum of pressurized water in the pipe from flowing back when the pump is suddenly stopped. What are check
Gate Valve vs. Ball Valve: Choosing the Right Valve Introduction Choosing the right and appropriate valve for your project is important, and different types of valves are used in different places.Just like gate valves should be used in normally open or normally closed situations, muffler check valves are used after pumps.This is how you can
What is a gate valve used for? What is a gate valve? In daily life, gate valves are a very common thing. It is a door with main opening and closing parts. The opening and closing parts of the gate valve are the ram, and the direction of movement of the ram is perpendicular to
What is the basic structure of a gate valve? Introduction As an important type of valve, gate valves are widely used in various fluid pipeline systems. Their internal structures can be classified into multiple types based on different classification criteria. The following will detail the classification of the internal structure of gate valves and their
Maintenance of pressure relief valves Introduction Safety release valves and valves used in critical operating conditions are essential for maintaining safe and effective systems and environmental protection. These valves are often used to control the pressure of the system and to avoid pressure buildup resulting in serious safety problems and hazards. This is why these
What is a Ball Valve? Introduction A ball valve is a valve with a circular channel of the ball as the opening and closing parts, the ball with the stem rotation to achieve the opening and closing action. The opening and closing member of the ball valve is a perforated sphere, rotating around the axis
Ball Valve Leaking? Top Causes and How to Fix Them Introduction During the use or installation of ball valves, internal leakage may occur. Due to frequent opening and closing or not being installed as required, the ball valve does not work properly. Here, we will explain the causes and treatment of ball valve leaks, as
Part I: General Introduction The remote control float valve consists of a main valve and its attached conduit, pilot valve, needle valve, ball valve and pressure gauge. When the pipeline supplies water from the water inlet, since the needle valve, ball valve and float valve are normally open, water enters the pool through the micro
Part One Introduction The lug type butterfly valve is mainly composed of a valve body, a valve bonnet, a valve stem, a plate, a sealing ring, etc. When the plate rotates around the axis in the valve body, the sealing ring will stick tightly to the plate, thereby realizing the opening and closing of the
Part I Introduction The wafer type dual plate check valve has a very simple structure. Compared with other check valves, its structure length is also very short, and the connection method is a wafer type. The valve plate is two semicircular butterfly plates, which are connected by a valve stem and forced to reset by
Part I Introduction Pipe Repair Clamp is a connector and repairer developed for pipeline connection sealing system, using stainless steel shell and rubber combination of compression sealing technology, suitable for 21mm-2032mm pipe diameter pipe connection. The product development concept breaks through the traditional pipeline connection technology, according to the requirements of different pipeline systems to
